Hawk front wiring
Hawk front wiring
I'm trying to find the best route for the wiring at the front of the hawk, I'm sure it is obvious but I'm just not getting. Do the earths go on either side of the offside horn mounting? and what route do I take to get to the headlights?
Hi,
Have a look at my old web site http://www.cobra289.com/, you will see how I run the wiring. I run as following
a. Run through drivers firewall (assume RHD)
b. Downside of wing, then across front member to nearside (front member that has the anti-rollbar) You will find that two holes exist either side of the horn for the earth.
c. get the wiring for front headlights + indicators above raditor
d. Cut a hole near the top and in middle of side wing from inside the front nose.
e. feed the wires through and connect up headlights.
I hope this helps?
Thanks
John.
Have a look at my old web site http://www.cobra289.com/, you will see how I run the wiring. I run as following
a. Run through drivers firewall (assume RHD)
b. Downside of wing, then across front member to nearside (front member that has the anti-rollbar) You will find that two holes exist either side of the horn for the earth.
c. get the wiring for front headlights + indicators above raditor
d. Cut a hole near the top and in middle of side wing from inside the front nose.
e. feed the wires through and connect up headlights.
I hope this helps?
Thanks
John.