Acf 50
-
- Posts: 43
- Joined: Mon Dec 23, 2013 9:33 pm
Re: Acf 50
Hi, if you want to, but it simply works, I should imagine you don't spray it in your eyes or leave the tin near an open fire!!
-
- Posts: 2077
- Joined: Sat Nov 15, 2008 8:20 pm
- Location: Leicestershire, UK
- Contact:
Re: Acf 50
I think Roger swears by this stuff.
- Roger King
- Posts: 4396
- Joined: Mon Mar 19, 2007 10:29 pm
- Location: St Ives, Cambs
Re: Acf 50
I don't swear by it just yet - I haven't been using it long enough, but I'm using it on my Cobra. I'm actually using their Corrosion Block, not the ACF50. I like the fact that it's clear and doesn't make the mess the Dinitrol does. My car is bare aluminium inside the wings and engine bay etc., they were never painted in there, and this will look much better than the thicker waxes I normally use on steel cars. Basically I plan to spray it in the engine bay.
I had a long talk with them about which product to use and how to apply it. Lear emphasise that it is designed to be a very thin thickness coating. You should not be able to see it once applied; if it's at all thick it will not dry and everything will stick to it. The company strongly recommends a very fine mist coat, applied with a no.4 nozzle spraygun on a compressor (65 psi, 3-5 cfm), so this is what I will do when the car is back from the trimmers. Clarke do a 'el cheapo' spray gun that fits the bill so I have bought one of those to save mucking up my 'proper' one. I have Dinitrol in the arches and under the floors as ACF50 (and CB) has zero abrasion resistance.
It's used a lot by bikers for winter protection. In areas like suspension etc. it is suggested to reapply every 3-4 months.
It's fine for electrics, but don't get any on the brakes!!
I had a long talk with them about which product to use and how to apply it. Lear emphasise that it is designed to be a very thin thickness coating. You should not be able to see it once applied; if it's at all thick it will not dry and everything will stick to it. The company strongly recommends a very fine mist coat, applied with a no.4 nozzle spraygun on a compressor (65 psi, 3-5 cfm), so this is what I will do when the car is back from the trimmers. Clarke do a 'el cheapo' spray gun that fits the bill so I have bought one of those to save mucking up my 'proper' one. I have Dinitrol in the arches and under the floors as ACF50 (and CB) has zero abrasion resistance.
It's used a lot by bikers for winter protection. In areas like suspension etc. it is suggested to reapply every 3-4 months.
It's fine for electrics, but don't get any on the brakes!!