AC Logo wheel spinners.

Roger King · Post by **Roger King** » Mon May 14, 2007 7:59 pm

I thought you'd find Orson a better bet!
British sportcars used fine threaded spinners (12 tpi) and coarse threaded (8 tpi). Gerry's hub adapters, front MGB and rear Jag, are all (to the best of my knowledge) 8 tpi - I have never seen any with fine thread.
Please put me down for a definite set of 4off, 8 tpi. Payment at Silverstone on Saturday OK?

Roger.

David Large · Post by **David Large** » Mon May 14, 2007 9:51 pm

I guess this is where it starts to get complicated.
I wil happily collect from Orson and bring to Silverstone, but I will only be there on the Sunday.
Also I think that if Clive makes some blanket order arrangement we should each contact Orson, place our order and pay them direct.

David

richmixture · Post by **richmixture** » Wed May 23, 2007 9:48 am

gents

can someone please tell me what the gen is on the spinners front, it seems that this is still in mid air with no final list, no-one seems to own this issue?

I dont know if spinners are comming or not - who is dealing with the admin /ordering.

I would be happy to do this if people want to pay me via paypal, and send me the details, I will sort it out

Kris

David Large · Post by **David Large** » Wed May 23, 2007 8:32 pm

Surely if Clive has a deal with Orson all we need to do is order individually, pay Orson and then I will collect and deliver to Silverstone on the Sunday.

For anyone not at Silverstone on Sunday I am sure we can make some sort of delivery arrangement?

Cheers

richmixture · Post by **richmixture** » Thu May 24, 2007 9:12 am

Dave,

that is fine, do you have the contact details for orson?
i will give them a ring.

thanks

David Large · Post by **David Large** » Thu May 24, 2007 5:22 pm

Here are the details, copied from an earlier post in this thread.

Orson Equipment Ltd
Unit 8, Peartree Industrial Park
Crackley Way, off Peartree Lane,
Dudley, West Midlands DY2 0UW
England +44-1384-241717
+44-1384-240403
sales@orson-equipment.com
http://www.orson-equipment.com

Regards

Post by **clive** » Thu May 24, 2007 6:16 pm

richmixture wrote:Dave,

that is fine, do you have the contact details for orson?
i will give them a ring.

thanks

Kris,
The arrangement was , or is, that I would order the spinners and distribute them at Silverstone. If everyone starts to order individually then I will not know how many sets to order.
My intention was to order next week (Beginning of June)and charge them to my credit card then if I'm paid at Silverstone I will not be charged interest.
If you however want to order direct please let me know so I don't duplicate the order.
I will be annoyed if folk order individually after my initial negotiatons

Post by **clive** » Thu May 24, 2007 6:45 pm

OK. Here is the current up to date position.
I now have confirmed orders from the following:-

1. Myself
2. Bill Telford.
3. David Large.
4. John Abel.
5. Kris.
6. Allan Tunstall
7. Dougall.
8. Roger King.

As notified in my previous post I intend to place the order next week.
If there is any change in your circumstances PLEASE let me know before Thursday 31 May. If not I will assume that this is correct.

If anyone else would like to order, then again let me know no later than Thursday 31 May.

kaiserbilly1 · Post by **kaiserbilly1** » Thu May 24, 2007 11:39 pm

Hi Clive

Thank you for doing this, these arrangements work for me, just let me know how you would like me to get the money to you.

regards

Bill

David Large · Post by **David Large** » Fri May 25, 2007 7:01 am

Clive this works for me, I was only suggesting that people paid individually to avoid you standing out the money.

I will collect if you wish and bring to Silverstone.......but I will only be there on the sunday.

David