In the wiring to the speedo there is a break in the green wire as if there is supposed to be maybe an inline fuse do I simply join them together, I am using an electronic smiths gauge.
The green wiring to the Rev Counter is the same but I guess that this is where I insert an inline 3amp fuse.
Am I right?
Any help greatly appreciated.
Thanks
SJ
Speedo and Tacho wiring
My car has the ford loom and the wiring for the speedo is green to green, but I have no fuse fitted. I am considering fitting a fuse as I am curently on a restricted 3,000 miles per annum with my insurance, and the fuse might just "blow" and it could take me a few thousand miles to get round to fixing it. (If you see what I mean!)
Cheers, Clive.
(If I'm not here I'm in my workshop or on the golf course!)
(If I'm not here I'm in my workshop or on the golf course!)
Speedo Transducer
Thanks nice idea.
I now see that I have a rover transducer with a brown wire and a yellow wire. i believe I can use this along with an electronic speedo. Has anyone else tried this, I think it requires a pull up resistor?
I now see that I have a rover transducer with a brown wire and a yellow wire. i believe I can use this along with an electronic speedo. Has anyone else tried this, I think it requires a pull up resistor?
Hi SJ,
Who supplied your speedo? If it was Caerbont then try http://www.caigauge.com/index.htm and check them out. Give them a phone, they are very helpful.
Who supplied your speedo? If it was Caerbont then try http://www.caigauge.com/index.htm and check them out. Give them a phone, they are very helpful.
Cheers, Clive.
(If I'm not here I'm in my workshop or on the golf course!)
(If I'm not here I'm in my workshop or on the golf course!)