Wiper blades

Technical Area for all the problems you have in the garage
Post Reply
User avatar
clive
T289R Member
T289R Member
Posts: 3392
Joined: Thu Mar 01, 2007 1:18 am
Location: Perth

Re: Wiper blades

Post by clive »

How many wires are there at the switch? Have you tried swapping them round?
Cheers, Clive.

(If I'm not here I'm in my workshop or on the golf course!)
User avatar
nikbj68
T289R Member
T289R Member
Posts: 1475
Joined: Thu Jul 17, 2008 3:31 pm
Location: Anglesey, North Wales.
Contact:

Re: Wiper blades

Post by nikbj68 »

In the drawing above, If 10--2 and 3--3 were 10--3 and 3--2, that should reverse the operation of the switch, shouldn't it?
Hawk 289 FiA...AT LAST!!!
Homewood
T289R Member
T289R Member
Posts: 216
Joined: Thu May 10, 2007 10:35 am

Re: Wiper blades

Post by Homewood »

I have six wires exactly like the diagram will try swapping today, will let you know thanks.
User avatar
nikbj68
T289R Member
T289R Member
Posts: 1475
Joined: Thu Jul 17, 2008 3:31 pm
Location: Anglesey, North Wales.
Contact:

Re: Wiper blades

Post by nikbj68 »

I would rather you had a second opinion before ‘going live’, I’d hate the thought of damaging anything based on my question, as I’m no expert!
Hawk 289 FiA...AT LAST!!!
frats289
Posts: 65
Joined: Fri May 15, 2015 9:26 am

Re: Wiper blades

Post by frats289 »

I have 10" Tex blades on my car, they work reasonably well but only after more than a little fettling especially to the arms, spring tension and all that.
Homewood
T289R Member
T289R Member
Posts: 216
Joined: Thu May 10, 2007 10:35 am

Re: Wiper blades

Post by Homewood »

Sorted was wired correctly just dodgy pr7 switch think it may need using after years standing
Post Reply