Wiper blades
Re: Wiper blades
How many wires are there at the switch? Have you tried swapping them round?
Cheers, Clive.
(If I'm not here I'm in my workshop or on the golf course!)
(If I'm not here I'm in my workshop or on the golf course!)
- nikbj68
- T289R Member
- Posts: 1475
- Joined: Thu Jul 17, 2008 3:31 pm
- Location: Anglesey, North Wales.
- Contact:
Re: Wiper blades
In the drawing above, If 10--2 and 3--3 were 10--3 and 3--2, that should reverse the operation of the switch, shouldn't it?
Hawk 289 FiA...AT LAST!!!
Re: Wiper blades
I have six wires exactly like the diagram will try swapping today, will let you know thanks.
- nikbj68
- T289R Member
- Posts: 1475
- Joined: Thu Jul 17, 2008 3:31 pm
- Location: Anglesey, North Wales.
- Contact:
Re: Wiper blades
I would rather you had a second opinion before ‘going live’, I’d hate the thought of damaging anything based on my question, as I’m no expert!
Hawk 289 FiA...AT LAST!!!
Re: Wiper blades
I have 10" Tex blades on my car, they work reasonably well but only after more than a little fettling especially to the arms, spring tension and all that.
Re: Wiper blades
Sorted was wired correctly just dodgy pr7 switch think it may need using after years standing