Hi, does anyone out there know of any used MGB hex wheel spinners that could be begged/borrowed/hired or purchased to get me through the IVA please ? Also, would an early MGB steering wheel pass IVA ?
Regards, Paul
IVA Wheel Spinners
- StewbieC
- T289R Committee
- Posts: 1361
- Joined: Mon Oct 13, 2008 12:50 pm
- Location: out in the sticks, Shropshire
Re: IVA Wheel Spinners
Hi Paul,
When is your IVA planned?
MGB steering wheels can pass, but they can't have spokes or holes where jewellery can become trapped (seriously, no joke) also it is better If the horn push is fitted even if it doesn't work as they are collapsible.
Just ask away if there are any other questions.
When is your IVA planned?
MGB steering wheels can pass, but they can't have spokes or holes where jewellery can become trapped (seriously, no joke) also it is better If the horn push is fitted even if it doesn't work as they are collapsible.
Just ask away if there are any other questions.
________________________________________________
Stu
Hawk 289, 66 Mustang Fastback with a 289 maximum smiles per mile..
Stu
Hawk 289, 66 Mustang Fastback with a 289 maximum smiles per mile..
Re: IVA Wheel Spinners
Did you buy your car from Hawk Cars.
If so talk nicely to Gerry. He offered to loan the hex wheel nuts for my SVA.
Otherwise there may well be other members who are nearing build end that you can liaise with to share the use of the nuts with.
Peter C
If so talk nicely to Gerry. He offered to loan the hex wheel nuts for my SVA.
Otherwise there may well be other members who are nearing build end that you can liaise with to share the use of the nuts with.
Peter C
Re: IVA Wheel Spinners
Thanks for that guys.
I need to do a dyno run, brake test & suspension setup before I apply so I guess late Feb is a likely test date.
Got my kit from Gerry 2 years ago & a few bits since, so could try that route.
Thanks, PaulC
I need to do a dyno run, brake test & suspension setup before I apply so I guess late Feb is a likely test date.
Got my kit from Gerry 2 years ago & a few bits since, so could try that route.
Thanks, PaulC