IVA Wheel Spinners

Technical Area for all the problems you have in the garage
Post Reply
PaulC
Posts: 4
Joined: Sun Jan 03, 2016 10:03 am

IVA Wheel Spinners

Post by PaulC »

Hi, does anyone out there know of any used MGB hex wheel spinners that could be begged/borrowed/hired or purchased to get me through the IVA please ? Also, would an early MGB steering wheel pass IVA ?
Regards, Paul
User avatar
StewbieC
T289R Committee
T289R Committee
Posts: 1356
Joined: Mon Oct 13, 2008 12:50 pm
Location: out in the sticks, Shropshire

Re: IVA Wheel Spinners

Post by StewbieC »

Hi Paul,
When is your IVA planned?
MGB steering wheels can pass, but they can't have spokes or holes where jewellery can become trapped (seriously, no joke) also it is better If the horn push is fitted even if it doesn't work as they are collapsible.
Just ask away if there are any other questions.
________________________________________________
Stu
Hawk 289, 66 Mustang Fastback with a 289 maximum smiles per mile..
User avatar
peterc
T289R Member
T289R Member
Posts: 2041
Joined: Wed Mar 05, 2014 9:05 am
Location: Surrey

Re: IVA Wheel Spinners

Post by peterc »

Did you buy your car from Hawk Cars.
If so talk nicely to Gerry. He offered to loan the hex wheel nuts for my SVA.
Otherwise there may well be other members who are nearing build end that you can liaise with to share the use of the nuts with.
Peter C
PaulC
Posts: 4
Joined: Sun Jan 03, 2016 10:03 am

Re: IVA Wheel Spinners

Post by PaulC »

Thanks for that guys.
I need to do a dyno run, brake test & suspension setup before I apply so I guess late Feb is a likely test date.
Got my kit from Gerry 2 years ago & a few bits since, so could try that route.
Thanks, PaulC
Post Reply