If I grab hold of my steering column where it comes through the bulkhead (engine side) I can move it up and down more than I should be able to (not at home so cant put up a video) I’ll obviously have to take the column out but can anybody tell me what bush I will need for the lower part of the upper column?
Thank you
Simon
MGB column bush
- simonjrwinter
- Posts: 1367
- Joined: Sun Jan 03, 2010 8:25 pm
- Location: Upminster, Essex.
MGB column bush
TR6 (V8) Hawk 289 FIA (V8) Doing my bit for global warming.
Re: MGB column bush
Just about to do that myself, assuming it's the early MGB column, it's on the MGOC site it's:- Bush - Lower - Felt 17H6565
Hope that helps?
Hope that helps?
Regards
Ken
Ken
Re: MGB column bush
Make sure it isn't the outer column moving in the hole in the footwell. I thought the bush in mine was worn but discovered there was a slight gap in the hole because the column comes through at an angle. A wee drop of epoxy adhesive filled the gap and all is now well.
Cheers, Clive.
(If I'm not here I'm in my workshop or on the golf course!)
(If I'm not here I'm in my workshop or on the golf course!)
Re: MGB column bush
I seem to remember having the same issue and re enforced the bulkhead with an Ali plate.
Peter C
Peter C
-
- T289R Member
- Posts: 68
- Joined: Tue Jan 05, 2016 12:56 am
Re: MGB column bush
I bought a large heavy duty grommet that had internal diameter same size as outer sleeve of column. This mounts in the bulk head wall vertically, but because the column is fixed at an angle rather horizontally through grommet it wedges in the grommet slightly so no wobble or movement.
- simonjrwinter
- Posts: 1367
- Joined: Sun Jan 03, 2010 8:25 pm
- Location: Upminster, Essex.
Re: MGB column bush
Thanks gents. The outer column is fixed pretty solidly in the bulkhead. It’s the inner column that has the play.
Simon
Simon
TR6 (V8) Hawk 289 FIA (V8) Doing my bit for global warming.
- simonjrwinter
- Posts: 1367
- Joined: Sun Jan 03, 2010 8:25 pm
- Location: Upminster, Essex.
Re: MGB column bush
Video here....
https://youtu.be/FPd8TMhFgmE
Pics show column. Do you think it’s MGB or Gerry’s column?
Simon
https://youtu.be/FPd8TMhFgmE
Pics show column. Do you think it’s MGB or Gerry’s column?
Simon
You do not have the required permissions to view the files attached to this post.
TR6 (V8) Hawk 289 FIA (V8) Doing my bit for global warming.
- StewbieC
- T289R Committee
- Posts: 1358
- Joined: Mon Oct 13, 2008 12:50 pm
- Location: out in the sticks, Shropshire
Re: MGB column bush
That is an early B column.
That looks like the felt bushes have dried out. The quickest acceptable fix is to pack them out with thin card. Cornflakes packets are known to suit. The felt then needs to have oil smeared into them. When you reassemble the column the steering will initially be tight and will not self centre, but then loosens pretty quickly to an acceptable level.
The bushes are felt strips about 3/4" wide that are cut diagonally (where both ends mate) and seated in a recess at the bottom of the column. To get to them you have to remove the column, draw out the shaft and then you can get to the felt bushes. You might want to check and change the plastic bush at the top too!
Good luck!
That looks like the felt bushes have dried out. The quickest acceptable fix is to pack them out with thin card. Cornflakes packets are known to suit. The felt then needs to have oil smeared into them. When you reassemble the column the steering will initially be tight and will not self centre, but then loosens pretty quickly to an acceptable level.
The bushes are felt strips about 3/4" wide that are cut diagonally (where both ends mate) and seated in a recess at the bottom of the column. To get to them you have to remove the column, draw out the shaft and then you can get to the felt bushes. You might want to check and change the plastic bush at the top too!
Good luck!
________________________________________________
Stu
Hawk 289, 66 Mustang Fastback with a 289 maximum smiles per mile..
Stu
Hawk 289, 66 Mustang Fastback with a 289 maximum smiles per mile..
- simonjrwinter
- Posts: 1367
- Joined: Sun Jan 03, 2010 8:25 pm
- Location: Upminster, Essex.
Re: MGB column bush
Thanks Stu, will remove, assess and report back...
TR6 (V8) Hawk 289 FIA (V8) Doing my bit for global warming.
- StewbieC
- T289R Committee
- Posts: 1358
- Joined: Mon Oct 13, 2008 12:50 pm
- Location: out in the sticks, Shropshire
Re: MGB column bush
The reason for the play is probably a result of the top of the column shaft being pulled out more at the top to allow sufficient column shaft at the top to extend through the dash and allow the VW indicator switch and Boss to be fitted. It's the same with most cars mine included.
BTW. If you decide to paint your footwells White, use Innotec White construction primer and clear coat. Looks very similar to white gel coat. Masking up is a bit of a pain but the results will look splendid. Just need to key the surface with some 400 grit paper.
BTW. If you decide to paint your footwells White, use Innotec White construction primer and clear coat. Looks very similar to white gel coat. Masking up is a bit of a pain but the results will look splendid. Just need to key the surface with some 400 grit paper.
________________________________________________
Stu
Hawk 289, 66 Mustang Fastback with a 289 maximum smiles per mile..
Stu
Hawk 289, 66 Mustang Fastback with a 289 maximum smiles per mile..