Washer jets

Technical Area for all the problems you have in the garage
289jlc
Posts: 14
Joined: Wed Apr 15, 2015 10:45 pm

Re: Washer jets

Post by 289jlc »

Andy, your diagram is correct, the Aluminium cars used self tapped screws into the aluminium bodywork to secure them.

Personally I used another stainless plate 2mm thick, a copy of the plate above the gasket but thicker, I tapped the mount hols to match the screw thread and copied the centre hole from the top plate.

Thanks Lee
User avatar
amulheirn
T289R Committee
T289R Committee
Posts: 1207
Joined: Mon May 13, 2013 2:30 pm
Location: Surrey/Hampshire
Contact:

Re: Washer jets

Post by amulheirn »

Thanks Lee - good to know. It seemed to work alright, so I assumed I'd got it right.
I might put this on the wiki for future reference.

Cheers,

Andy
Post Reply