Andy, your diagram is correct, the Aluminium cars used self tapped screws into the aluminium bodywork to secure them.
Personally I used another stainless plate 2mm thick, a copy of the plate above the gasket but thicker, I tapped the mount hols to match the screw thread and copied the centre hole from the top plate.
Thanks Lee
Washer jets
- amulheirn
- T289R Committee
- Posts: 1207
- Joined: Mon May 13, 2013 2:30 pm
- Location: Surrey/Hampshire
- Contact:
Re: Washer jets
Thanks Lee - good to know. It seemed to work alright, so I assumed I'd got it right.
I might put this on the wiki for future reference.
Cheers,
Andy
I might put this on the wiki for future reference.
Cheers,
Andy