Full harness belts in a Hawk

Technical Area for all the problems you have in the garage
Post Reply
User avatar
simonjrwinter
Posts: 1357
Joined: Sun Jan 03, 2010 8:25 pm
Location: Upminster, Essex.

Full harness belts in a Hawk

Post by simonjrwinter »

Just out of interest, has anybody fitted four/five point seatbelts in a Hawk? If so how was it achieved?
Thanks
Simon
TR6 (V8) Hawk 289 FIA (V8) Doing my bit for global warming.
andyg
T289R Member
T289R Member
Posts: 205
Joined: Sun Dec 23, 2007 5:23 pm
Location: Reading

Re: Full harness belts in a Hawk

Post by andyg »

Hi Simon
I have a four point harness in my FIA
The lap straps are mounted using eye bolts screwed into the standard seatbelt mounts on the floor. For the shoulder straps, I had four threaded bosses welded onto the cross member of the seatbelt frame behind the seats. Eye bolts then screw into these to provide the mounting point.

Andy
User avatar
simonjrwinter
Posts: 1357
Joined: Sun Jan 03, 2010 8:25 pm
Location: Upminster, Essex.

Re: Full harness belts in a Hawk

Post by simonjrwinter »

Thanks Andy
TR6 (V8) Hawk 289 FIA (V8) Doing my bit for global warming.
User avatar
peterc
T289R Member
T289R Member
Posts: 2041
Joined: Wed Mar 05, 2014 9:05 am
Location: Surrey

Re: Full harness belts in a Hawk

Post by peterc »

Personally I wouldn’t want a full harness unless I had a full width roll over bar.
Peter C
Frank289
T289R Member
T289R Member
Posts: 101
Joined: Sun Nov 13, 2016 8:12 pm

Re: Full harness belts in a Hawk

Post by Frank289 »

Im still thinking what to do. 2 points is the easyest but unsafe? 3 points doesnt look that cool. 4 points is hard to get in!
Grtz Frank. so im thinking about 4 or 2 points. advice needed LOL
Post Reply