air filter hose near exhaust
air filter hose near exhaust
Gents, hope you can advise, I've got a 70mm hose that runs about 50mm from the exhaust due to lack of space in that area. I presume I'll need to fabricate a heat shield? I know the engine bay gets quite hot, but wondered if this was too hot!
Regards
Ken
Ken
Re: air filter hose near exhaust
Ken, the minimum you should do is to lag the exhaust with some suitable exhaust wrap. Have you got a remote air filter that it needs an inlet hose. Most people have the filters mounted directly to the carb. Would you not have separate pancake filters on each carb as I believe you will be running a straight 6 Triumph unit.
Peter C
Peter C
Re: air filter hose near exhaust
Hi Peter, thanks for that, I was advised that the engines run better if the original system were used and weren't good with the pancake type. The exhaust wrap is good, I had forgotten about that, Thanks again.
Regards
Ken
Ken