Fitting the side screens

Technical Area for all the problems you have in the garage
Post Reply
simonjrwinter
Posts: 623
Joined: Sun Jan 03, 2010 8:25 pm
Location: Upminster, Essex.

Fitting the side screens

Post by simonjrwinter » Sat Sep 07, 2019 7:09 pm

In preparation for my upcoming paint job, I’m trying to do all the little jobs still outstanding (tonneau on hold...)
To that end I’ve started to fit the side screens. I followed the instructions to the letter but I’d appreciate opinions on how it looks so far.....
Simon
CC6C53E0-B077-46DB-815F-6A96665134A6.jpeg
EFF68AE5-AD17-4D87-8DA5-CCA3AC95AF09.jpeg
85E5C7A1-550B-4BE6-84D5-B8D36CCFCCCC.jpeg
D223FF84-8F01-4C13-845D-B4EBF805E30A.jpeg
95F0EDE8-8C5F-4A18-A998-D741320BCA96.jpeg
TR6 (V8) Hawk 289 FIA (V8) GD MK3 (V8) Doing my bit for global warming.

simonjrwinter
Posts: 623
Joined: Sun Jan 03, 2010 8:25 pm
Location: Upminster, Essex.

Re: Fitting the side screens

Post by simonjrwinter » Sat Sep 07, 2019 9:50 pm

I’d also really appreciate some close up pictures of finished sidescreens if possible, both fitted and lose would be great. I was thinking about covering them myself. I can source the material and window channel.
Thanks
TR6 (V8) Hawk 289 FIA (V8) GD MK3 (V8) Doing my bit for global warming.

User avatar
clive
T289R Member
T289R Member
Posts: 2991
Joined: Thu Mar 01, 2007 1:18 am
Location: Perth

Re: Fitting the side screens

Post by clive » Mon Sep 09, 2019 4:14 pm

Hope these are suitable.

Image

Image

Image

Image

Image
Cheers, Clive.

(If I'm not here I'm in my workshop or on the golf course!)

simonjrwinter
Posts: 623
Joined: Sun Jan 03, 2010 8:25 pm
Location: Upminster, Essex.

Re: Fitting the side screens

Post by simonjrwinter » Mon Sep 09, 2019 4:32 pm

Thank you Clive
TR6 (V8) Hawk 289 FIA (V8) GD MK3 (V8) Doing my bit for global warming.

frenchy
Posts: 1
Joined: Thu May 02, 2019 6:52 pm

Re: Fitting the side screens

Post by frenchy » Mon Nov 04, 2019 7:39 am

simonjrwinter wrote:
Mon Sep 09, 2019 4:32 pm
Thank you Clive

KevinW
Posts: 296
Joined: Mon Dec 14, 2015 6:29 pm
Location: West Sussex

Re: Fitting the side screens

Post by KevinW » Wed Nov 06, 2019 2:10 pm

I have a similar gap on my bubbletop above the sidescreen frames as in Simon's last pic - in fact they aren't a very good fit round the curved part of the moulding either.

Be interested to see how you get on with this aspect.

User avatar
Azzy83
T289R Member
T289R Member
Posts: 18
Joined: Fri Jan 02, 2015 11:57 pm
Location: Melbourne, Australia

Re: Fitting the side screens

Post by Azzy83 » Thu Nov 07, 2019 6:47 am

Hope this helps
Attachments
C79EE434-4660-4B86-9614-DCB2D466AD94.jpeg

User avatar
StewbieC
T289R Committee
T289R Committee
Posts: 1133
Joined: Mon Oct 13, 2008 12:50 pm
Location: out in the sticks, Shropshire

Re: Fitting the side screens

Post by StewbieC » Thu Nov 07, 2019 9:44 am

You need a Nigel
Attachments
WP_20181117_15_08_02_Pro.jpg
________________________________________________
Stu
Hawk 289, maximum smiles per mile..

peterc
T289R Member
T289R Member
Posts: 1272
Joined: Wed Mar 05, 2014 9:05 am
Location: Surrey

Re: Fitting the side screens

Post by peterc » Thu Nov 07, 2019 12:27 pm

I can’t see a roll over hoop.
Peter C

Post Reply