Front suspension geometry

Technical Area for all the problems you have in the garage
Post Reply
Jerryedmans
T289R Member
T289R Member
Posts: 68
Joined: Tue Jan 05, 2016 12:56 am

Front suspension geometry

Post by Jerryedmans »

Reading the setup of Jag suspension with interest. Am now working thru some fine tuning on my Hawk and having just added poly bushes to front am about to realign. From what I can see on past articles I should be aiming for -0.8 camber at front. Neutral castor (I.e. Just go with Hawk setup?) but not sure if the computer used by my local garage needs a number for this. Can't find anything on toe-in? Anyone got any recommendations? Cheers. Jerry
Jerryedmans
T289R Member
T289R Member
Posts: 68
Joined: Tue Jan 05, 2016 12:56 am

Re: Front suspension geometry

Post by Jerryedmans »

Turns out they had AC 289 alignment settings already on the alignment computer at the local garage! All set up within 7' :D
User avatar
peterc
T289R Member
T289R Member
Posts: 2041
Joined: Wed Mar 05, 2014 9:05 am
Location: Surrey

Re: Front suspension geometry

Post by peterc »

If it’s a Hawk then the set up should be as per an MGB.
Peter C
Post Reply