Hi chaps
I need UNC bolts to attach a 302 engine to a stand.
Without any thread gauges looks like I need 3/8"?
There are a couple of clearance holes, one either side of the engine, that it looks like I can use through bolts in, but I think I will have to bolt directly into a couple of tappings.
Actually, No.
They are not clearance.
Just spotted they are tapped as well.
Roger mentioned Namrick but anyone know any local suppliers in Herts.
I'm in St Albans
John
UNC Bolts
Re: UNC Bolts
Hi John,
I used Namrick for all of my bolts etc. First class company and delivery next day.
I used Namrick for all of my bolts etc. First class company and delivery next day.
Cheers, Clive.
(If I'm not here I'm in my workshop or on the golf course!)
(If I'm not here I'm in my workshop or on the golf course!)
-
StewbieC
- T289R Committee
- Posts: 1361
- Joined: Mon Oct 13, 2008 12:50 pm
- Location: out in the sticks, Shropshire
Re: UNC Bolts
Normally, with the Clark / Sealey Engine stands you pick up on four of the bellhousing bolt holes.
If you pm your address I think I've got four that you can have. They are a bit long but you can use oversize nuts or washers on the bolt head side of the stand to space them off. I wont be able to get them until the weekend, but let me know either way.
Rgds
If you pm your address I think I've got four that you can have. They are a bit long but you can use oversize nuts or washers on the bolt head side of the stand to space them off. I wont be able to get them until the weekend, but let me know either way.
Rgds
________________________________________________
Stu
Hawk 289, 66 Mustang Fastback with a 289 maximum smiles per mile..
Stu
Hawk 289, 66 Mustang Fastback with a 289 maximum smiles per mile..