Alf
You have a PM
Wiring Harness
Re: Wiring Harness
Early B.R.A. Warmed 3.9 Rover, 5 sp, 3.07 rear, Fully adjustable front suspension with AVO coilovers, 4 link rear suspension AVO coilovers and Panhard bar, Big 2 pot front calipers, rear discs, servo'd, adjustable front / rear bias, scruffy paint job !
Re: Wiring Harness
Hi CobStang
Thanks for your PM which I did replay right now
Thanks for your PM which I did replay right now
Re: Wiring Harness
Hi Roger
I've one question I'm sure you can provide the answer.
Many thanks for your help!
Does AutoSparks provide the wirring harnesses with or without connectors?
I assume if yes they would ues standard bullet connectors.
I've one question I'm sure you can provide the answer.
Many thanks for your help!
Does AutoSparks provide the wirring harnesses with or without connectors?
I assume if yes they would ues standard bullet connectors.
- Roger King
- Posts: 4396
- Joined: Mon Mar 19, 2007 10:29 pm
- Location: St Ives, Cambs
Re: Wiring Harness
Yes, connectors are all as they should be. Mostly bullets, but spade connectors where appropriate and the correct open type for the DB10 etc. If you are repositioning anything, I usually ask them to leave those wires longer with no connectors as obviously they do not have access to a car to take measurements from.ALF wrote:Hi Roger
I've one question I'm sure you can provide the answer.
Many thanks for your help!
Does AutoSparks provide the wirring harnesses with or without connectors?
I assume if yes they would ues standard bullet connectors.
Re: Wiring Harness
Many thanks for your help!
Re: Wiring Harness
Hi Roger
I did order my harness (after a few changes on the requirements) from Autosparks and got it delivered after ~10 weeks.
Some optical corrections were made from my side (to get a nicer wiring on the DB10) and related to the specific placements of the electrical parts.
Mounted it now on my car and it went from my point of view not bad.
I did order my harness (after a few changes on the requirements) from Autosparks and got it delivered after ~10 weeks.
Some optical corrections were made from my side (to get a nicer wiring on the DB10) and related to the specific placements of the electrical parts.
Mounted it now on my car and it went from my point of view not bad.
- Roger King
- Posts: 4396
- Joined: Mon Mar 19, 2007 10:29 pm
- Location: St Ives, Cambs
Re: Wiring Harness
Hi Alf,
Photos not visible I'm afraid - glad it went well.
Photos not visible I'm afraid - glad it went well.
-
- Posts: 2077
- Joined: Sat Nov 15, 2008 8:20 pm
- Location: Leicestershire, UK
- Contact:
Re: Wiring Harness
No need to shout Nik.
I can see them as well and they look good to me.
Paul
I can see them as well and they look good to me.
Paul
- Roger King
- Posts: 4396
- Joined: Mon Mar 19, 2007 10:29 pm
- Location: St Ives, Cambs
Re: Wiring Harness
All I'm getting is little blue squares with question marks in them!