Project Sanity
- Roger King
- Posts: 4396
- Joined: Mon Mar 19, 2007 10:29 pm
- Location: St Ives, Cambs
Re: Project Sanity
Hey, those bonnet tubes look great. And the positioning of them - perfect - must have been absolute top-notch information you got there, from somebody or other
Re: Project Sanity
Hi Nige,
I see that you found someone to bend the bonnet tubing for you. Now to cut the fibreglass frame and set them in. The Ali inlets are obviously to copy the oil cooler inlet you manufactured for the Viper.
Keep the photos coming.
Peter C
I see that you found someone to bend the bonnet tubing for you. Now to cut the fibreglass frame and set them in. The Ali inlets are obviously to copy the oil cooler inlet you manufactured for the Viper.
Keep the photos coming.
Peter C
- Roger King
- Posts: 4396
- Joined: Mon Mar 19, 2007 10:29 pm
- Location: St Ives, Cambs
Re: Project Sanity
Roger I think this is a bit of practise on the current build ready for the real deal scratch build. So the Hawk bonnet but cut back to look like All with a tubular frame. Owains car is going to be a half way house being a fibreglass Hawk but with numerous improvements. E.g. Better than the Viper.
Sorry if I have spilt the beans Nige.
Peter C
Sorry if I have spilt the beans Nige.
Peter C
Re: Project Sanity
Thanks Rog, I had a little chat with this "guru" guy that helped me immensely with "absolute top notch information" for the dimensions I needed.Roger King wrote:Hey, those bonnet tubes look great. And the positioning of them - perfect - must have been absolute top-notch information you got there, from somebody or other
![Wink :wink:](./images/smilies/icon_wink.gif)
Nige
Re: Project Sanity
Er, no, not on this one, this one's staying fibreglassRoger King wrote:Surely you're making an aluminium skin?
Nige
Last edited by agnoraan on Sat Feb 04, 2017 11:46 pm, edited 1 time in total.
Re: Project Sanity
Hi Peter, it's ok, you've not said anything out of place and you're absolutley correct. This is a bit of a practice run and yes, this car is a halfway house between your normal Hawk, if there is such a thing, and how the aluminium scratch built car will be. I want to try and show how, with a little time and effort, and not a lot of money, it's possible to make a Hawk look a little more individual whilst retaining the ethos of an original . Once finished this car will have loads of little "changes" going on, that hopefully will make it look a bit more like an original style race car.peterc wrote:Roger I think this is a bit of practise on the current build ready for the real deal scratch build. So the Hawk bonnet but cut back to look like All with a tubular frame. Owains car is going to be a half way house being a fibreglass Hawk but with numerous improvements. E.g. Better than the Viper.
Sorry if I have spilt the beans Nige.
Peter C
The bonnet will be fibreglass, but I'm only using the outer skin. but it'll be made to replicate the look of an aluminium one, with the tube frame, a folded edge replicating the outer skin folded over on the inside and a totally smooth underside
![Wink :wink:](./images/smilies/icon_wink.gif)
![Wink :wink:](./images/smilies/icon_wink.gif)
![Laughing :lol:](./images/smilies/icon_lol.gif)
Nige
Last edited by agnoraan on Sun Feb 05, 2017 5:57 am, edited 3 times in total.
- Roger King
- Posts: 4396
- Joined: Mon Mar 19, 2007 10:29 pm
- Location: St Ives, Cambs
Re: Project Sanity
I thought you were going the 'Colin' route - Colin's old Hawk had aluminium doors, bonnet and bootlid, which gave it a very realistic feel.
Re: Project Sanity
I'm hoping it'll have that look and realistic feel, but at a fraction of the time, money and effort to do it all in aluminiumRoger King wrote:I thought you were going the 'Colin' route - Colin's old Hawk had aluminium doors, bonnet and bootlid, which gave it a very realistic feel.
![Wink :wink:](./images/smilies/icon_wink.gif)
![Razz :P](./images/smilies/icon_razz.gif)
The aluminium "Insanity" comes next and I can't wait to get on with it. I already have the tubular bonnet frame dimensions
![Laughing :lol:](./images/smilies/icon_lol.gif)
Nige
Last edited by agnoraan on Sun Feb 05, 2017 12:07 am, edited 2 times in total.
Re: Project Sanity
A quick question, what exhaust silencers do people tend to use to pass the IVA noise test?
Nige
Nige