Easter Project

289, FIA & Daytona topics
Post Reply
User avatar
StewbieC
T289R Committee
T289R Committee
Posts: 1269
Joined: Mon Oct 13, 2008 12:50 pm
Location: out in the sticks, Shropshire

Easter Project

Post by StewbieC »

Got my Easter project sorted.
Installing a bubble hard top to my 289, with a roll bar. As I've taken Lynn Parks El Cid as inspiration (as I've got to fit a bubble within the bubble top) I've christened it "El Stu". I got in touch with Lynn and he kindly sent me some pics (jolly decent chap). The wonders of Facebook.
Gerry says it's not easy as the windscreen might not have the right rake, the lift a dots will probably be in the way as will the fuel cap and the side screens probably won't fit either. I like a challenge......
________________________________________________
Stu
Hawk 289, 66 Mustang Fastback with a 289 maximum smiles per mile..
KevinW
T289R Member
T289R Member
Posts: 410
Joined: Mon Dec 14, 2015 6:29 pm
Location: West Sussex

Re: Easter Project

Post by KevinW »

I have a 289 hardtop for modding and fitting to my Crendon at some point post-IVA. The roll bar also fouls the rear. Be very interested to see any pics and updates.
User avatar
peterc
Posts: 1544
Joined: Wed Mar 05, 2014 9:05 am
Location: Surrey

Re: Easter Project

Post by peterc »

Stewbie, out of interest will this start as a Le Mans style hardtop or a short version (finishing at the same point as the soft hood). If the fuel filler is getting in the way I assume it is a short version.

Certainly Gerry has mentioned to me before that the screen should be angled more for a hardtop. With the Le Mans version I think this makes it look better and more streamlined. Not sure if it also applies to a short version hardtop.
Changing the screen angle will of course affect the hood and side screens.

Photos of Modsports cars from Nige’s article indicate that they had the short version hardtops.

Kevin, I think your Crendon roll bar brace goes to the rear as per 427’s but 289’s have their brace running forwards into the passenger footwell.
Peter C
KevinW
T289R Member
T289R Member
Posts: 410
Joined: Mon Dec 14, 2015 6:29 pm
Location: West Sussex

Re: Easter Project

Post by KevinW »

Peter - you are correct. When offered up the rear brace and top of roll bar fouls the Hawk bubble top that I have. I could add a teardrop Gurney bubble to get over the top part, but still pondering about the rear brace.
User avatar
peterc
Posts: 1544
Joined: Wed Mar 05, 2014 9:05 am
Location: Surrey

Re: Easter Project

Post by peterc »

Hmm, could be an interesting rear window!
Peter C
User avatar
John H
T289R Committee
T289R Committee
Posts: 142
Joined: Tue Apr 30, 2013 9:43 pm
Location: Inverness
Contact:

Re: Easter Project

Post by John H »

Hi All, I am doing the same thing with a Hawk bubble....I cut a relatively small hole for the roll bar to fit. I will add some form of vent to stop the rain coming in but still let the air out! She is away getting painted right now but will share some photos once done. I also need to cut the hole in the rear window to allow access to the filler.....I made the side windows to fit the hard top as I won't have a soft top.
Good luck with the Easter project! John

https://cobra289fia.com/2017/12/28/bubb ... eparation/
Built St Piran Hawk289FIA in Scotland!
User avatar
StewbieC
T289R Committee
T289R Committee
Posts: 1269
Joined: Mon Oct 13, 2008 12:50 pm
Location: out in the sticks, Shropshire

Re: Easter Project

Post by StewbieC »

I've got the top sat down and the roll hoop just fouls on the area at the top of the rear screen so an EL Cid bubble will be spot on.
Screen rake was spot on and filler cap doesn't foul.

Yes Pete it's a short roof.

Will be mostly fettling an ally bubble this weekend.
________________________________________________
Stu
Hawk 289, 66 Mustang Fastback with a 289 maximum smiles per mile..
User avatar
John H
T289R Committee
T289R Committee
Posts: 142
Joined: Tue Apr 30, 2013 9:43 pm
Location: Inverness
Contact:

Re: Easter Project

Post by John H »

Stu, I have the same idea so would love to see what you come up with as a bubble....John
Built St Piran Hawk289FIA in Scotland!
User avatar
StewbieC
T289R Committee
T289R Committee
Posts: 1269
Joined: Mon Oct 13, 2008 12:50 pm
Location: out in the sticks, Shropshire

Re: Easter Project

Post by StewbieC »

Started forming John, but these things take time without an English wheel or planishing hammer.
Will post some pics of progress as it takes shape.
________________________________________________
Stu
Hawk 289, 66 Mustang Fastback with a 289 maximum smiles per mile..
KevinW
T289R Member
T289R Member
Posts: 410
Joined: Mon Dec 14, 2015 6:29 pm
Location: West Sussex

Re: Easter Project

Post by KevinW »

Any new updates/pics on this project?
Post Reply