Can anyone tell me if the indicator stalk has to self cancel for the IVA testing ...
I’ve tried to see if I can adapt and use the early Mgb stalk (don’t mind the look of the early ones) but even with modification I don’t think this route will work so VW/ Karmann Ghia it is
Does anyone have a spare stalk with flasher they are willing to part with or can recommend a supplier/part number . I also believe I need to fabricate a small sleeve for the upper end of the column to allow fitment of this
Indicator Stalk
Re: Indicator Stalk
Hi Chris,
I used INDBK from Car Builder Solutions. It fits in the column directly. Only problem is the contacts are open so I knocked up a small cowl from the base of a Domestos bottle and covered in leather. -Domestos because the plastic is thicker- I used this switch as it was cheap and only for short use.
I'm sure some of the others would work but this is just my experience.
I used INDBK from Car Builder Solutions. It fits in the column directly. Only problem is the contacts are open so I knocked up a small cowl from the base of a Domestos bottle and covered in leather. -Domestos because the plastic is thicker- I used this switch as it was cheap and only for short use.
I'm sure some of the others would work but this is just my experience.
-
- T289R Member
- Posts: 25
- Joined: Fri Dec 06, 2019 10:03 am
Re: Indicator Stalk
Many thanks Stu
Re: Indicator Stalk
Hi Chris, I've been thinking and I'm not altogether sure I fitted the switch directly to the MGB column. I lent my stuff out so I'll check if there was an adapter/extension and come back to you on this one. Sorry for any misinformation.